Home | english  | Impressum | Datenschutz | Sitemap | KIT
francoM

Dr.-Ing. Franco Magagnato
Dozent - Assistant Professor of Polytechnic University of St. Petersburg / Guestprofessor of the Harbin Engineering University and Jiangsu University
Gruppenleiter
Raum: 604
Tel.: +49 721 608-43813
franco magagnato ∂does-not-exist.kit edu

Institut für Strömungsmechanik
Karlsruher Institut für Technologie
Kaiserstraße 10, Geb. 10.23
76131 Karlsruhe
Tel.: +49 721 608 42368
Fax: +49 721 608 45147

Bücher und Fachzeitschriftveröffentlichungen


Experimental and numerical study on the effect mechanism of geometric parameters on jet impingement cooling in a limited space
Fu, H.; Luan, J.; Yang, L.; Luan, Y.; Magagnato, F.; Stroh, A.
2025. International Journal of Thermal Sciences, 207, 109384. doi:10.1016/j.ijthermalsci.2024.109384
Multi-objective optimization of jet impingement cooling structure with smooth target surface and enhanced target surface in a limited space
Fu, H.; Luan, J.; Yang, L.; Luan, Y.; Magagnato, F.; Stroh, A.
2024. International Communications in Heat and Mass Transfer, 159, 108192. doi:10.1016/j.icheatmasstransfer.2024.108192
Effect of pore plugging on transpiration cooling performance implemented with perforated flat plates
Ma, H.; Yang, L.; Luan, Y.; Sun, H.; Magagnato, F.
2024. International Communications in Heat and Mass Transfer, 159 (Part C), 108248. doi:10.1016/j.icheatmasstransfer.2024.108248
Noise Mechanisms of an Axial Turbine Stage Based on Large Eddy Simulation
Yan, L.; Luan, Y.; Simoni, D.; Sun, T.; Yang, L.; Zunino, P.; Magagnato, F.
2024. Flow, Turbulence and Combustion, 113 (2), 249–273. doi:10.1007/s10494-024-00547-1
The investigation of double wall cooling configuration with spherical cavity
Zhang, L.; Luan, Y.; Yang, L.; Wu, X.; Sun, T.; Magagnato, F.
2024. International Communications in Heat and Mass Transfer, 159 (A), 107960. doi:10.1016/j.icheatmasstransfer.2024.107960
The heat transfer enhancement mechanism of W-shaped micro-ribs on impingement cooling
Fu, H.; Sun, H.; Luan, J.; Yang, L.; Luan, Y.; Magagnato, F.
2024. Applied Thermal Engineering, 252, Art.-Nr.: 123658. doi:10.1016/j.applthermaleng.2024.123658
Numerical research for the influence of cylindrical ribs and inclined mainstream on double wall cooling configurations
Luan, Y.; Zhang, L.; Wu, X.; Yang, L.; Magagnato, F.; Sun, T.
2024. International Journal of Thermal Sciences, 197, Art.-Nr.: 108841. doi:10.1016/j.ijthermalsci.2023.108841
Investigation of different deflector geometry and mechanism effect on the performance of an in-pipe hydro Savonius turbine
Bizhanpour, A.; Hasanzadeh, N.; Najafi, A. F.; Magagnato, F.
2023. Applied Energy, 350, Art.Nr.: 121697. doi:10.1016/j.apenergy.2023.121697
Effects of the configuration of the delta winglet longitudinal vortex generators and channel height on flow and heat transfer in minichannels
Fu, H.; Sun, H.; Yang, L.; Yan, L.; Luan, Y.; Magagnato, F.
2023. Applied Thermal Engineering, 227, Art.-Nr.: 120401. doi:10.1016/j.applthermaleng.2023.120401
Research for double wall cooling configuration with flower shaped ribs
Luan, Y.; Zhang, L.; Yang, L.; Yin, Y.; Magagnato, F.; Sun, T.
2023. International Journal of Thermal Sciences, 193, 108493. doi:10.1016/j.ijthermalsci.2023.108493
Numerical Investigation of Flow and Heat Transfer in Rectangular Microchannels with and without Semi-Elliptical Protrusions
Sun, H.; Fu, H.; Yan, L.; Ma, H.; Luan, Y.; Magagnato, F.
2022. Energies, 15 (13), Art.-Nr.: 4927. doi:10.3390/en15134927
Investigation of in-pipe drag-based turbine for distributed hydropower harvesting: Modeling and optimization
Hasanzadeh, N.; Payambarpour, S. A.; Najafi, A. F.; Magagnato, F.
2021. Journal of cleaner production, 298, Article no: 126710. doi:10.1016/j.jclepro.2021.126710
Performance Improvement of Trailing Edge Internal Cooling with Drop-Shaped Pin Fin Array
Wang, P., Zhongyi; Yin, P. D., Yue; Bu, P. D., Shi; Luan, P., Yigang; Magagnato, P., Franco
2021. Journal of Aerospace Engineering, 34 (3), Art.-Nr.: 04021013. doi:10.1061/(ASCE)AS.1943-5525.0001255
Numerical investigation of the effects of system volume and average mass flow on the surge characteristics of an axial compressor
Wang, M.; Sun, H.; Wang, Z.; Wang, Y.; Magagnato, F.; Luan, Y.
2020. Aerospace Science and Technology, 106, Art.-Nr.: 106172. doi:10.1016/j.ast.2020.106172
Cooling effectiveness of matrix, pin fin array and hybrid structure: A comparative study
Yang, L.; Luan, Y.; Bu, S.; Sun, H.; Magagnato, F.
2021. Proceedings of the Institution of Mechanical Engineers / G, 235 (9), 1008–1022. doi:10.1177/0954410020965401
Numerical simulation of the non-uniform flow in a full-annulus multi-stage axial compressor with the harmonic balance method
Sun, H.; Wang, M.; Wang, Z.; Wang, S.; Magagnato, F.
2020. Advances in mechanical engineering, 12 (3), 168781401989721. doi:10.1177/1687814019897213
Investigation of deflector geometry and turbine aspect ratio effect on 3D modified in-pipe hydro Savonius turbine: Parametric study
Payambarpour, S. A.; Najafi, A. F.; Magagnato, F.
2020. Renewable energy, 148, 44–59. doi:10.1016/j.renene.2019.12.002
Investigation of Blade Number Effect on Hydraulic Performance of In-Pipe Hydro Savonius Turbine
Payambarpour, S. A.; Najafi, A. F.; Magagnato, F.
2019. International journal of rotating machinery, 2019, 1–14. doi:10.1155/2019/8394191
Numerical study on air-core vortex: analysis of generation mechanism
Khoshkalam, N.; Najafi, A. F.; Rahimian, M. H.; Magagnato, F.
2020. Archive of applied mechanics, 90, 1–16. doi:10.1007/s00419-019-01596-z
Numerical investigation of surge prediction in a transonic axial compressor with a hybrid BDF/Harmonic Balance Method
Sun, H.; Wang, M.; Wang, Z.; Magagnato, F.
2019. Aerospace science and technology, 90, 401–409. doi:10.1016/j.ast.2019.05.006
The influence of operating conditions on combustion chamber deposit surface structure, deposit thickness and thermal properties
Weidenlener, A.; Pfeil, J.; Kubach, H.; Koch, T.; Forooghi, P.; Frohnapfel, B.; Magagnato, F.
2018. Automotive and Engine Technology. doi:10.1007/s41104-018-0030-3
Numerical and experimental investigation of texture shape and position in the macroscopic contact
Codrignani, A.; Frohnapfel, B.; Magagnato, F.; Schreiber, P.; Schneider, J.; Gumbsch, P.
2018. Tribology international, 122, 46–57. doi:10.1016/j.triboint.2018.02.001
A modified Parametric Forcing Approach for modelling of roughness
Forooghi, P.; Frohnapfel, B.; Magagnato, F.; Busse, A.
2018. International journal of heat and fluid flow, 71, 200–209. doi:10.1016/j.ijheatfluidflow.2018.03.019
DNS of momentum and heat transfer over rough surfaces based on realistic combustion chamber deposit geometries
Forooghi, P.; Weidenlener, A.; Magagnato, F.; Böhm, B.; Kubach, H.; Koch, T.; Frohnapfel, B.
2018. International journal of heat and fluid flow, 69, 83–94. doi:10.1016/j.ijheatfluidflow.2017.12.002
Simulation of a shock tube with a small exit nozzle
Luan, Y.; Olzmann, M.; Magagnato, F.
2018. Journal of thermal science, 27 (1), 34–38. doi:10.1007/s11630-018-0981-8
Multi-step optimizations of leading edge and downstream film cooling configurations on a high pressure turbine vane
Jiang, Y.; Wan, X.; Magagnato, F.; Yue, G.; Zheng, Q.
2018. Applied thermal engineering, 134, 203–213. doi:10.1016/j.applthermaleng.2018.02.012
Toward a Universal Roughness Correlation
Forooghi, P.; Stroh, A.; Magagnato, F.; Jakirlic, S.; Frohnapfel, B.
2017. Journal of fluids engineering, 139 (12), Art. Nr.: 121201. doi:10.1115/1.4037280
VLES Modeling of Flow Over Walls with Variably-shaped Roughness by Reference to Complementary DNS
Krumbein, B.; Forooghi, P.; Jakirlić, S.; Magagnato, F.; Frohnapfel, B.
2017. Flow, turbulence and combustion, 99 (3-4), 685–703. doi:10.1007/s10494-017-9867-1
Thermo-hydraulic flow in a sudden expansion
Jaeger, W.; Schumm, T.; Niemann, M.; Hering, W.; Stieglitz, R.; Magagnato, F.; Frohnapfel, B.; Fröhlich, J.
2017. IOP conference series / Materials science and engineering, 228 (1), Art. Nr.: 012001. doi:10.1088/1757-899X/228/1/012001
Turbulent flow structure response to a varying wall-roughness arrangement: a modelling study
Jakirlic, S.; Krumbein, B.; Forooghi, P.; Magagnato, F.; Frohnapfel, B.
2016. APS Division of Fluid Dynamics, 2016 (11). doi:10.1103/BAPS.2016.DFD.H29.3
Flow over a surface with multiscale randomly distributed roughness
Forooghi, P.; Stroh, A.; Krumbein, B.; Magagnato, F.; Jakirlic, S.; Frohnapfel, B.
2017. Flow, turbulence and combustion / Special issue: engineering turbulence modelling and measurements, 99 (3-4), 551–990
Simulation of a Centrifugal Pump by Using the Harmonic Balance Method
Magagnato, F. A.; Zhang, J.
2015. International journal of rotating machinery, Art. Nr.: 729140. doi:10.1155/2015/729140
Extended modeling of decelerating turbulent jets for diesel spray’s penetration after end-of-injection
Liu, L.; Ma, X.; Magagnato, F. A.
2017. Fuel, 199, 324–331. doi:10.1016/j.fuel.2017.02.105
A scaling parameter for pressure losses and thermal effects in lubricant flows with viscous dissipation
Codrignani, A.; Savio, D.; Magagnato, F.; Frohnapfel, B.
2017. Tribology international, 113, 238–244. doi:10.1016/j.triboint.2016.12.007
Simulation of a gaseous jet impinging on a convex heated surface – effect of inlet condition
Forooghi, P.; Frohnapfel, B.; Magagnato, F.
2016. Applied thermal engineering, 105 (SI), 1076–1084. doi:10.1016/j.applthermaleng.2016.01.048
Optimum dimple diameter for friction reduction with laser surface texturing: the effect of velocity gradient
Greiner, C.; Merz, T.; Braun, D.; Codrignani, A.; Magagnato, F.
2015. Surface topography, 3 (4). doi:10.1088/2051-672X/3/4/044001
Large Eddy Simulation (LES) with Moving Meshes on a Rapid Compression Machine: Part 2: Numerical Investigations Using Euler-Lagrange-Technique
Magagnato, F.; Gabi, M.; Heidenreich, T.; Velji, A.; Speicher, U.
2008. High Performance Computing in Science and Engineering `07 : Large Eddy Simulation (LES) with Moving Meshes on a Rapid Compression Machine: Part 2: Numerical Investigations Using Euler–Lagrange-Technique. Ed.: W. E. Nagel, 419–430, Springer-Verlag. doi:10.1007/978-3-540-74739-0_28
Stochastic-field cavitation model
Dumond, J.; Magagnato, F.; Class, A.
2013. Physics of Fluids, 25 (7), 073302/1–28. doi:10.1063/1.4813813

Konfrenzbeiträge

  1. S. Jakirlic, B. Krumbein, P. Forooghi, F. Magagnato, B. Frohnapfel (2016): "Turbulent flow structure response to a varying wall-roughness arrangement: a modelling study", Bulletin of the American Physical Society

  2. P. Forooghi, B. Frohnapfel, F. Magagnato (2016): "Simulation of a gaseous jet impinging on a convex heated surface-effect of inlet condition", Applied Thermal Engineering.

  3. Forooghi P, Li M, Magagnato F. 2015. Simulation of heat transfer from a convex heated surface using an impinging jet, 17th IAHR International Conference on Cooling Towers and Heat Exchangers, 7-11 Sep., Gold Coast, Australia.

  4. Forooghi P, Hess J, Frohnapfel B, Hooman K. 2015. Heat transfer of fluids with highly variable properties , 17th IAHR International Conference on Cooling Towers and Heat Exchangers, 7-11 Sep, Gold Coast, Australila.

  5. B. Jastrow and F. Magagnato (2012) "An Immersed Boundary Method for Simulating Compressible Viscous Flows in Complex Geometries", AFM 2012, 19th International Conference on Advances in Fluid Mechanics, Split, Croatia, DOI: 10.2495/AFMI20091

  6. Magagnato, F. and Dumond, J. (2012): ”Large Eddy Simulation of Cavitating Flows using a Novel Stochastic Field Formulation“, 23rd International Symposium on Transport Phenomena, Auckland, New Zealand

  7. Jastrow, B. and Magagnato, F. (2012): “An Immersed Boundary Method for Simulating Compressible Viscous Flows in Complex Geometries“, AFM 2012, 9th International Conference on Advances in Fluid Mechanics, Split, Croatia

  8. Magagnato, F. and Claas, A.(2012): ”Simulation of Compressible Cavitating Flows using a Novel Stochastic Field Formulation“, CAV2012, 8th International Symposium on Cavitation, Singapore,

  9. Magagnato, F. (2010): ”LES of a Spark-Ignition Engine using different Combustion Models“, International Conference on LES for Internal Combustion Engine Flows, (LES4ICE), Rueil-Malmaison, France

  10. Lipp, S., Magagnato, F. and Maas, U.(2009): ”A hybrid transported PDF/CFD model for turbulent flames using REDIM“, Proceedings of the European Combustion Meeting, Vienna, Austria

  11. Magagnato, F., Walcker, A. and Gabi, M. (2009): “Prediction of the cyclic variations of an ICE with LES“. JSAE Annual Congress in Pacifico, Yokohama, Japan

  12. Magagnato, F., Pritz, B. and Gabi, M. (2009): ”A Novel Approach to Predict the Stability Limit of Combustion Chambers with LES“. International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows. 9th ISAIF, Gyeongju, South Korea

  13. Magagnato, F., Pritz, B. and Gabi, M. (2009): "Prediction of the Damping Characteristics of a Combustion chamber by LES", The 20th International Symposium on Transport Phenomena, Victoria BC, Canada

  14. Magagnato, F., Yong, Y. and Gabi, M. (2008): "Large Eddy Simulation of a Spark-Ignition Engine using a High-Pass filtered Eddy-Viscosity Model". The 7th COMODIA Int. Conf. on Modeling and Diagnostics, Sapporo, Japan

  15. Magagnato, F., Bühler, S. and Gabi, M. (2008): "Modeling the wall roughness for RANS and LES using the Discrete Element Method". ICTAM 2008, Adelaide, Australia

  16. Pritz, B., Magagnato, F. and Gabi, M. (2006): ”Inflow conditions for large-eddy simulation applied to a combustion chamber“. Proceedings of 13th Int. Conference on Fluid Flow Technologies, Budapest, Hungary

  17. Magagnato, F., Pritz, B. and Gabi, M.(2006): ”Inflow conditions for large-eddy simulation of compressible flow in a combustion chamber“. Proceedings of 5th Int. Symposium on Turbulence, Heat and Mass Transfer, Dubrovnik, Croatia

  18. Lipp, S., Magagnato, F. and Maas, U. (2006): "PDF Simulations of Turbulent Flames Using ILDM", 11th International Conference on Numerical Combustion, Granada, Spain

  19. Magagnato, F., Pritz, B. and Gabi, M. (2006): ”Calculation of a Turbine Blade at high Reynoldsnumber by LES“. Proceedings of the 11th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii

  20. Magagnato, F., Rachwalski, J. and Gabi, M. (2005): ”Numerical Investigation of the VKI Turbine Blade by Large Eddy Simulation“. Proceedings of the 6th European Conference on Turbomachinery: Fluid Dynamics and Thermodynamics, Lille, France

  21. Pantle, I., Magagnato, F., Gabi, M. (2005): Approach for Hydro-Acoustic Computations of Channel Flows, 11th AIAA/CEAS Aeroacoustics Conference, Monterey, USA

  22. Pantle, I., Sorgüven, E., Magagnato, F., and Gabi, M. (2004): ”Numerical Noise Prediction methods for Pumps“. In Preprints pump/Compressor Users International Forum 2004, Karlsruhe, Germany

  23. Magagnato, F., Sorgüven, E. and Gabi, M. (2004): ”Large Eddy Simulation of a Generic Fan and Far Field Noise Prediction“. Proceedings of the 10th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii

  24. Pantle, I., Sorgüven, E., Magagnato, F., and Gabi, M. (2003): ”Numerical Sound Prediction of Open Rotors: Methods, Results and Perspectives“: In Proceedings Joint Congress: 7. Congrès Français d’Acoustique/30. Deutsche Jahrestagung für Akustik (CFD/DAGA04), Strasbourg, France

  25. Sorgüven, E., Magagnato, F., and Gabi, M. (2003): ”Prediction of the far field noise of a simplified propeller with Large Eddy Simulation“. Deutscher Luft- und Raumfahrtkongress Jahrbuch 2003, DGLR-2003-068

  26. Sorgüven, E., Magagnato, F., and Gabi, M. (2003): ”Sound prediction of an airfoil in the wake of a cylinder“, EUROMECH 449 'Computational Aeroacoustics: from acoustic sources modeling to far-field radiated noise prediction, Chamonix, France

  27. Magagnato, F., Rachwalski, J. and Gabi, M. (2003): ”An Application of the Buffer Layer Technique to Computapions of Flows in Turbomachinery“. Proceedings of the Conference for Modelling Fluid Flow 2003, Budapest, Hungary

  28. Magagnato, F., Sorgüven, E. and Gabi, M. (2003):“ Far Field Noise Prediction by Large Eddy Simulation and Ffowcs-Williams Hawkings Analogy“. Proceedings of the 9th AIAA/CEAS Aeroacoustics Conference, Hilton Head SC, 2003, AIAA Paper 2003-3206

  29. Magagnato, F., Pantle, I. and Gabi, M. (2003): ”Prediction of Aero-Acoustic Noise Around a Circular Cylinder by Large Eddy Simulation“. Proceedings of the 5th European Conference on Turbomachinery: Fluid Dynamics and Thermodynamics, Prague, Czech

  30. Magagnato, F., Pantle, I. and Gabi, M. (2002): ”Prediction of aero-acoustic noise around a circular cylinder by large eddy simulation“. Proceedings of the Workshop on LES and Acoustics, Göttingen, Germany

  31. Rachwalski, J., Magagnato, F., and Gabi, M. (2002): ”The Buffer Layer Technique applied to Transonic Flow Calculations“. Transsonicum IV, Göttingen, Germany

  32. Magagnato, F., Pantle, I. and Gabi, M. (2002): ”Numerical Aeroacoustics using a combined CFD/Ffowcs-Williams-Hawkings Method“. Proceedings of the 9th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii

  33. Magagnato, F., Pantle, I. and Gabi, M.(2001): ”Aeroacoustical Computations of an Unsteady Flow around a 3D Circular Cylinder“. The 7th International Congress on Fluid Dynamics and Propulsion/ICFDP7, Cairo, Egypt

  34. Rachwalski, J., Magagnato, F., Gabi, M. and Doerffer, P. (2001): ”Prediction of the secondary Flow in a 3D Linear Turbine Cascade“. International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows. 5th ISAIF, Gdansk, Poland

  35. Morinigo, J. and Magagnato, F. (2001): ”Computation of the Shock-induced Separated Flow Field in a 2D Propulsion Nozzle“. International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows. 5th ISAIF, Gdansk, Poland

  36. Doerffer, P., Kaczynski, J., Kania, W., Magagnato, F., and Namiesnik, K. (2000): ”Numerical investigation of the helicopter blade tip geometry on the supersonic area formation and pressure disturbance intensity“. Conference on CFD for Aviation, Warschau, Poland

  37. Magagnato, F., and Gabi, M. (2000): ”A new Adaptive Turbulence Model for Unsteady Flow Fields in Rotating Machinery“. Proceedings of the 8th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii

  38. Magagnato, F. (1999): ”Unsteady flows past a turbine blade using non-linear two-equation turbulence model“. Proceedings of the 3rd European Conference on Turbomachinery: Fluid Dynamics and Thermodynamics, London, England

  39. Bleecke, H., Dortmann, K., Hasse, W., Leicher, S., Magagnato, F. and Rieger, H. (1993): ”Zwei- und Dreidimensional Strömungssimulation im Überschall durch Lösung der Navier-Stokes-Gleichungen“. Konferenz für Hyperschallströmungen, RWTH-Aachen, Deutschland

  40. Fritz, W., Magagnato, F. and Rieger, H. (1991): "Computational Methods for prediction of Turbulent Flows around Automobiles". Proceedings of the 3rd International Conference of Innovation and Reliability in Automotive Design and Testing, Florence, Italy

  41. Fritz, W., Magagnato, F. and Rieger, H. (1991): "Computational Methods for prediction of Turbulent Flows around Automobiles". VKI-Kongress, Fellbach, Germany

  42. Magagnato, F. (1990): "Computation of Axisymmetric Base Flow with Different Turbulence Models". AGARD-Proceedings 1990, AGARD-CP-493